Mercury Bravo 1 LT Propellers
Buy NowFilters
33 products
Bravo 1 LT Propeller
4-Blade Stainless Steel Pro-Finished Propeller
When it comes to propellers, “performance” is often measured by top speed alone. In reality, great all-around performance also requires outstanding hole shot, on-plane efficiency and fuel economy under a load. The Pro Finish Bravo I® LT outboard propeller covers all the performance bases and significantly optimizes ride quality. The flared exhaust tube lifts the stern. This brings the bow down for a more level ride. The result is improved handling and a dryer, more comfortable boating experience. Counter-rotation models expand the Bravo I® LT application from right-hand rotation, single engine outboard bay boats and multi-species hulls to multi-engine outboard center consoles.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
- The Bravo 1 LT "Long Tube" propeller has a extended and flared exhaust tube that is designed to lift the stern and bring the bow down.
- Get that extra performance with a pro-finish. Leading edges are thinned, cup heights are blueprinted, and every blade is zero balanced by hand.
Important Note:
- According to the Mercury propeller guide handbook if running a 3-blade propeller move up 1" of pitch to maintain similar RPMs.
- OR if replacing the Fury, Revolution 4 or a standard Bravo I propeller move up 2" of pitch to maintain similar RPMS.
- Upgrades from the Bravo I FS to the Bravo I LT require no change in pitch size when matching engine RPM.
Mercury Marine offers a 1-year limited warranty on all Mercury propellers. To determine warranty requirements for a specific item, please contact the manufacturer or contact us for assistance. Please note warranty processing may take 2-4 weeks and will be subject to Mercury Marine's policies and discretion. Mercury warranty does not cover defects determined to be caused by normal wear or due to customer negligence.
Call us at (920) 788-0220 during our standard business hours to talk to an expert. Or send us a message (average reply time 2h).
Description
Mercury Bravo 1 LT Propeller
When it comes to propellers, “performance” is often measured by top speed alone. In reality, great all-around performance also requires outstanding hole shot, on-plane efficiency and fuel economy under a load. The Pro Finish Bravo I® LT outboard propeller covers all the performance bases and significantly optimizes ride quality. The flared exhaust tube lifts the stern. This brings the bow down for a more level ride. The result is improved handling and a dryer, more comfortable boating experience. Counter-rotation models expand the Bravo I® LT application from right-hand rotation, single engine outboard bay boats and multi-species hulls to multi-engine outboard center consoles.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
- The Bravo 1 LT "Long Tube" propeller has a extended and flared exhaust tube that is designed to lift the stern and bring the bow down.
- Get that extra performance with a pro-finish. Leading edges are thinned, cup heights are blueprinted, and every blade is zero balanced by hand.
Important Note:
- According to the Mercury propeller guide handbook if running a 3-blade propeller move up 1" of pitch to maintain similar RPMs.
- OR if replacing the Fury, Revolution 4 or a standard Bravo I propeller move up 2" of pitch to maintain similar RPMS.
- Upgrades from the Bravo I FS to the Bravo I LT require no change in pitch size when matching engine RPM.
Mercury Bravo 1 LT Propeller
Stainless Steel
Mercury Flo-Torq Hub Kit (sold separately). Please see the fitment information below to determine which hub kit is needed for your application.
Through hub exhaust with Mercury's Performance Vent System (PVS).
- 15.25 x 19"
- 15.25 x 19.5"
- 15.25 x 20"
- 15.25 x 20.5"
- 15.25 x 21"
- 15.25 x 21.5"
- 15.25 x 22"
- 15.25 x 22.5"
- 15.25 x 23"
- 15.25 x 23.5"
- 15.25 x 24"
- 15.25 x 24.5"
- 15.25 x 25"
- 15.25 x 25.5"
- 15.25 x 26"
- 15.25 x 26.5"
- 15.25 x 27"
- 15.25 x 27.5"
- 15.25 x 28"
- 15.25 x 28.5"
- 15.25 x 29"
I run a Triton 216 Fishunter and the Bravo 1 LT has been great. The LT really helped get the nose down and make for a much smoother ride. I gained about 2mph by the GPS compared to my FS props.
Bravo 1 LT works great. The hole-shot is amazing and even gained some top-end speed too. 100% would recommend the Bravo 1 LT to anyone.
Mercury Bravo One LT propeller has the best hole-shot of any prop I've ever tried. When I'm tournament loaded it still jumps out like it would when I'm just going out for a day.
Bravo 1 "Long Tube" stern lift performance
The Mercury Bravo 1 LT Propeller redefines boat performance with its innovative design that lifts the stern via a flared exhaust tube for a leveled, more stable ride, while its long-tube design delivers extra stern lift and improved hole-shot performance—much like a built-in trim tab. Engineered specifically for walleye and bass boat applications, every unit is handcrafted by Mercury Racing artisans with a high luster Pro Finish for enhanced durability and corrosion resistance, ensuring that every ride is as smooth as it is powerful.
Plug-and-play performance.
Fine‑tune your hole shot with the Mercury Performance Vent System® (PVS®) holes behind each blade to inject just the right amount of aerated exhaust, reducing load and accelerating you onto plane in record time. Once on plane, the Bravo One LT delivers a powerful mid‑range punch, propelling your vessel through tight turns and choppy water with unwavering confidence.
Bravo 1 "Long Tube" stern lift performance
The Mercury Bravo 1 LT Propeller redefines boat performance with its innovative design that lifts the stern via a flared exhaust tube for a leveled, more stable ride, while its long-tube design delivers extra stern lift and improved hole-shot performance—much like a built-in trim tab. Engineered specifically for walleye and bass boat applications, every unit is handcrafted by Mercury Racing artisans with a high luster Pro Finish for enhanced durability and corrosion resistance, ensuring that every ride is as smooth as it is powerful.
Plug-and-play performance.
Fine‑tune your hole shot with the Mercury Performance Vent System® (PVS®) holes behind each blade to inject just the right amount of aerated exhaust, reducing load and accelerating you onto plane in record time. Once on plane, the Bravo One LT delivers a powerful mid‑range punch, propelling your vessel through tight turns and choppy water with unwavering confidence.
Mercury Bravo 1 LT Propeller Review
Mercury Racing Bravo 1 LT Propeller
Experience Next-Level Performance with the Mercury Bravo 1 LT Propeller When boating enthusiasts search for a propeller that not only delivers top-end speed but also ensures improved handling and c...
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.