Evinrude & Johnson Raker V4 Propeller
The Raker™ 3-Blade propeller with rubber hub is an excellent choice for the boater who wants to upgrade from an aluminum prop. The Evinrude/Johnson Raker is fine propeller for outstanding durability and good overall performance on most V-4 motors, and a few sterndrive models.
- Equipped with pressed-in rubber hub
- Stainless steel 3-blade design
- Polished, high luster finish
Call us at (920) 788-0220 during our standard business hours to talk to an expert. Or send us a message (average reply time 2h).
Description
Evinrude Johnson Raker V4
The Raker™ 3-Blade propeller with rubber hub is an excellent choice for the boater who wants to upgrade from an aluminum prop. The Evinrude/Johnson Raker is fine propeller for outstanding durability and good overall performance on most V-4 motors, and a few sterndrive models.
- Equipped with pressed-in rubber hub
- Stainless steel 3-blade design
- Polished, high luster finish
Evinrude Johnson Raker V4
Right-Hand Rotation (Clockwise)
Stainless Steel
Will this propeller fit my motor?
Raker V4 Propeller Fitment
The Evinrude Johnson Raker V4 propeller will come . Listed below are the brands and models of outboards/sterndrives that the Raker V4 propeller will fit.
Evinrude/Johnson 40 - 140 HP 2-Stroke Outboards (13-Spline)
Evinrude/Johnson 60 - 70 HP 4-Stroke Outboards (13-Spline)
Evinrude 115 H.O. - 150 HP 3-Cylinder 1.9L G2 (13-Spline)
OMC Sterndrives (13-Spline)
Expert Advice
Do you need guidance in selecting the correct Evinrude Johnson Raker V4 propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop Finder
Are you unsure which Evinrude Johnson Raker V4 Propeller you need for you application? Try using our new Prop Finder tool to get guaranteed fitment propellers for your motor.
Expert Advice
Do you need guidance in selecting the correct Evinrude Johnson Raker V4 propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop Finder
Are you unsure which Evinrude Johnson Raker V4 Propeller you need for you application? Try using our new Prop Finder tool to get guaranteed fitment propellers for your motor.
Testimonials
Jebediah L.
Evinrude Viper Propeller
My fuel mileage is much much better for when we make long runs. The Viper propeller is a perfect match for my 300HP Evinrude outboard. Handles great when offshore too.
Tanner B.
Johnson 3-Blade Aluminum Propeller
I was struggling to find the correct prop for my 1982 Johnson 115HP 2-Stroke outboard. Thankfully I was able to use the Prop Finder Tool and was able to find a perfect fit propeller. Thank you.
Jarren D.
Evinrude Stainless Steel Raker Propeller
I had an old Raker II propeller that I dinged up. I was able to find an exact replacement for the propeller just with the added vent holes. The Raker H.O. propeller has been perfect.
Jose P.
Evinrude Rogue Propeller
The Evinrude Rogue propeller does a much better job at getting my boat up on plane. Before if I was fully loaded someone would need to go to the front of the boat to take off. With the new prop it lifts the stern better.
Royce L.
Evinrude 3-Blade Aluminum Propeller
Good standard 3-blade aluminum propeller for my 90HP Evinrude outboard. Prop was delivered quickly and price was good.
Alex A.
Evinrude Rx3 Propeller
The Evinrude Rx3 propeller works well for my new Evinrude G2 outboard. The top speed is far and away better than it was with my old Raker prop.
Ozzie N.
Evinrude Cyclone Propeller
I went with the 4-blade propeller because it can get a bit wavy where I boat. The Cyclone propeller worked great with exceptional holding. Good propeller.
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.