Trophy Plus
4-Blade Stainless Steel Propeller



The Mercury Trophy Plus propeller is a 4-blade propeller known for great acceleration and top speed on 75-225 HP outboards (except V8). The 17-19P is designed for 75-115 HP outboards with the higher pitch ranges for 115-225 HP outboards.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
Important Note:
- The Trophy Plus has a 4.25" diameter barrel - when using on 4.75" gearcase applications and exhaust venting is excessive, install seal ring 878421
Mercury Marine offers a 1-year limited warranty on all Mercury propellers. To determine warranty requirements for a specific item, please contact the manufacturer or contact us for assistance. Please note warranty processing may take 2-4 weeks and will be subject to Mercury Marine's policies and discretion. Mercury warranty does not cover defects determined to be caused by normal wear or due to customer negligence.
Call us at (920) 788-0220 during our standard business hours to talk to an expert. Or send us a message (average reply time 2h).
Description
Mercury Trophy Plus Propellers
The Mercury Trophy Plus propeller is a 4-blade propeller known for great acceleration and top speed on 75-225 HP outboards (except V8). The 17-19P is designed for 75-115 HP outboards with the higher pitch ranges for 115-225 HP outboards.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
Important Note:
- The Trophy Plus has a 4.25" diameter barrel - when using on 4.75" gearcase applications and exhaust venting is excessive, install seal ring 878421
Mercury Trophy Plus Propeller
Stainless Steel
Mercury Flo-Torq Hub Kit (sold separately). Please see the fitment information below to determine which hub kit is needed for your application.
Through hub exhaust with Mercury's Performance Vent System (PVS).
- Important Note: The Trophy Plus has a 4.25" diameter barrel - when using on 4.75" gearcase applications and exhaust venting is excessive, install seal ring 878421
- 13.8 x 17"
- 13.8 x 19"
- 13.8 x 21"
- 13.8 x 23"
- 13.8 x 24"
- 13.8 x 25"
- 13.8 x 26"
I've always wanted to try a 4-blade propeller, and finally decided to get a new prop. The responsiveness is amazing, it really jumps out of the hole.

I tested out the Trophy Plus on my Nitro Z19 when I repowered and it has been everything I hoped for. If feels likes a whole new boat.

This is the ideal propeller for our Hewes Redfisher bay style boat. Even with just a 115HP outboard you really notice the difference between aluminum and stainless steel.

Precision on the water.
The Mercury Trophy Plus propeller sets the benchmark for speed, acceleration, and agility. Ideal for dynamic fishing environments the Trophy Plus propellers pairs well with fishing boats with mid-powered outboards. The Trophy Plus is most commonly used on Bass Boats, High-Performance Flats & Bay Boats, Lightweight Multie-Species & Walleye Boats, and Tunnel Hull Boats.
Plug-and-play performance.
The Trophy Plus Propeller features Mercury’s patented Performance Vent System (PVS®), which uses interchangeable vent plugs in up to three holes to precisely control exhaust gas venting for an optimized hole shot. By swapping plugs in seconds—from fully closed to various vent sizes—boaters can dial in engine RPM for quicker planing under different loads and altitudes
Precision on the water.
The Mercury Trophy Plus propeller sets the benchmark for speed, acceleration, and agility. Ideal for dynamic fishing environments the Trophy Plus propellers pairs well with fishing boats with mid-powered outboards. The Trophy Plus is most commonly used on Bass Boats, High-Performance Flats & Bay Boats, Lightweight Multie-Species & Walleye Boats, and Tunnel Hull Boats.
Plug-and-play performance.
The Trophy Plus Propeller features Mercury’s patented Performance Vent System (PVS®), which uses interchangeable vent plugs in up to three holes to precisely control exhaust gas venting for an optimized hole shot. By swapping plugs in seconds—from fully closed to various vent sizes—boaters can dial in engine RPM for quicker planing under different loads and altitudes
Mercury Trophy Plus Propeller Review
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.