


Mercury Ventera Pro Finished Propeller
The Mercury Racing Ventera propeller is designed to handle big outboard horsepower on the fastest high-performance center consoles, day cruisers and bay boats.
Exclusive to the Mercury Racing Profile Series, this four-blade propeller is engineered specifically to carry more load with greater efficiency at high speeds and in semi-surfacing installations. The Ventera features an increased blade diameter of 15" and a new blade thickness curve to handle more power without sacrificing performance.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
- Get that extra performance with a pro-finish. Leading edges are thinned, cup heights are blueprinted, and every blade is zero balanced by hand.
- The Ventera propeller features a larger 15" diameter for increased lift and reduce slip at higher engine heights. It also features a new unique blade thickness profile for added strength and top end speed.
Mercury Marine offers a 1-year limited warranty on all Mercury propellers. To determine warranty requirements for a specific item, please contact the manufacturer or contact us for assistance. Please note warranty processing may take 2-4 weeks and will be subject to Mercury Marine's policies and discretion. Mercury warranty does not cover defects determined to be caused by normal wear or due to customer negligence.
Call us at (920) 788-0220 during our standard business hours to talk to an expert. Or send us a message (average reply time 2h).

Description
Mercury Marine Ventera Propeller
The Mercury Racing Ventera propeller is designed to handle big outboard horsepower on the fastest high-performance center consoles, day cruisers and bay boats.
Exclusive to the Mercury Racing Profile Series, this four-blade propeller is engineered specifically to carry more load with greater efficiency at high speeds and in semi-surfacing installations. The Ventera features an increased blade diameter of 15" and a new blade thickness curve to handle more power without sacrificing performance.
- Hub kit is sold separately. Please see the fitment information provided to select the correct hub kit for your application.
- Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
- Get that extra performance with a pro-finish. Leading edges are thinned, cup heights are blueprinted, and every blade is zero balanced by hand.
- The Ventera propeller features a larger 15" diameter for increased lift and reduce slip at higher engine heights. It also features a new unique blade thickness profile for added strength and top end speed.
Mercury Marine Ventera Propeller
Stainless Steel
Will this propeller fit my motor?
Ventera Propeller Fitment
The Mercury Marine Ventera propeller requires a Flo-Torq hub kit for installation (sold separately). Listed below are the models of Mercury Marine outboards/sterndrives that the Ventera propeller will fit, along with the corresponding hub kit necessary for installation.
Mercury 135 - 400 HP Outboards
Mercury Mercruiser Alpha & Bravo One Sterndrives
Non-Mercury Outboards (4.75" Gearcase)

Mercury Ventera Blog

Mercury Racing Ventera Pro Finished Propeller
Mercury Racing Ventera: Unleashing Power and Precision on the Water When it comes to high-performance marine applications, the Mercury Racing Ventera propeller stands out as a true powerhouse. Desi...
Mercury Ventera Propeller
Robust four-blade precision & power.
The Mercury Racing Ventera propeller is a testament to innovative marine engineering. By combining a robust four-blade design with an increased blade diameter, advanced thickness curve, and the unparalleled precision of the Mercury Racing Pro Finish, the Ventera delivers exceptional performance for high-powered outboards on center consoles, day cruisers, and bay boats. Experience improved fuel economy, enhanced lift, and greater top-end speed—all of which empower you to push the boundaries of your on-water adventures.
Expert Advice
Do you need guidance in selecting the correct Mercury Marine Ventera propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop School
Do you have questions about the basics of propellers? Check out our comprehensive guide on the different facets of propeller technology, and its impact on boat performance.
Expert Advice
Do you need guidance in selecting the correct Mercury Marine Ventera propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop School
Do you have questions about the basics of propellers? Check out our comprehensive guide on the different facets of propeller technology, and its impact on boat performance.

The Mercury Ventera propeller runs true to pitch, similar to the Revolution 4 propeller. However, due to its increased diameter and added grip, most users typically experience an RPM drop of about 100 when keeping the same pitch. Because of this, many users opt to reduce pitch by one-inch.
Conversely, when switching from the Enertia ECO to the Ventera, it's recommended to increase pitch by one inch. For those moving from a Bravo Pro Finish to the Ventera, stepping down one inch in pitch is advised.
Ultimately, the decision depends on the current RPM range and whether there's room to adjust up or down.
(According to Mercury Racing Propeller Handbook)

During the Pro Finish process, the leading edges of the propeller are precisely thinned—though not to the extent of a Lab Finish—while the cup heights are meticulously blueprinted to ensure optimal performance. Each propeller is then carefully zero-balanced by hand, guaranteeing exceptional smoothness and precision.
Pro Finished propellers typically achieve an increase of approximately 200 RPM over stock models. With finely tuned leading edges and precisely engineered cup heights, this finishing process enhances overall performance and efficiency.
The Mercury Ventera propeller runs true to pitch, similar to the Revolution 4 propeller. However, due to its increased diameter and added grip, most users typically experience an RPM drop of about 100 when keeping the same pitch. Because of this, many users opt to reduce pitch by one-inch.
Conversely, when switching from the Enertia ECO to the Ventera, it's recommended to increase pitch by one inch. For those moving from a Bravo Pro Finish to the Ventera, stepping down one inch in pitch is advised.
Ultimately, the decision depends on the current RPM range and whether there's room to adjust up or down.
(According to Mercury Racing Propeller Handbook)
During the Pro Finish process, the leading edges of the propeller are precisely thinned—though not to the extent of a Lab Finish—while the cup heights are meticulously blueprinted to ensure optimal performance. Each propeller is then carefully zero-balanced by hand, guaranteeing exceptional smoothness and precision.
Pro Finished propellers typically achieve an increase of approximately 200 RPM over stock models. With finely tuned leading edges and precisely engineered cup heights, this finishing process enhances overall performance and efficiency.


Testimonials

Capt. Dave G.
Mercury Ventera Propeller
I have a 2008 Fountain 38' Center Console with triple 2022 Mercury 400HP Verado outboards. I switched fom the Bravo propeller to the Ventera 23P and they work well. I could have maybe went slightly lower in pitch for when fully loaded, but overall a great prop.

Mike H.
Mercury Ventera Props on 36' Invincible
The Suzuki propellers don't compare to the Mercury Racing propellers. I got a set of three Ventera 26P propellers for my triple Suzuki outboards and the grip/acceleration is much better. Thanks to Nick & Matt for helping me make the adjustments.

Melissa S.
Mercury Ventera Pro Finished Propellers
I had the Mirage Plus propellers on my triple 350HP outboards on my 38' Sterling. I switched to the Mercury Ventera propellers and noticed a significant change in handling and acceleration. I ran the 18P on the outside motors and the 19P on the inside.

Sam D.
Ventera Propeller
I like the idea of the larger diameter propeller. I started with the Enertia Eco propellers, then tried the Revolution 4 props, and the Ventera is kind of like a combination of both. It is really a Revolution 4 with a wider diameter like the Enertia Eco props. Works great, thank you!

Nicholas W.
Mercury Racing Ventera Propeller
I switched from the standard Revolution 4 propellers and was able to pick up 3-4 MPH on my Nor-Tech with twins. Thank you for the help Matt.

Cayman Marine
Mercury Ventera Pro Finished Propeller
I got the recommendation to switch to the Venetera propellers from Nick at Mercury. He told me to talk to Matt at Boat Prop Warehouse. Thank you for hooking me up with the sweet deal. I'm going to try the new props this weekend, can't wait!

William R.
Ventera Pro Finish Propeller
I was just able to test out the Ventera propellers this weekend on my Boston Whaler Outrage. Great bite compared to the Rev 4's and picked up a few MPH too. I appreciate your help and quick email response.
Shop All
Mercury Propellers
Whether you’re looking for a replacement prop or want to optimize your boat’s speed, hole shot or efficiency, keep in mind that prop selection is about more than just pitch, diameter and number of blades. Performance is influenced by every aspect of a prop’s geometry, right down to cup, rake angle and edge shape.
Aluminum
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.