Mercury Revolution XR Pro Finished Propeller
If you like how your boat rides with a Mercury Revolution X but want to pick up a little RPM at wide-open throttle, the Mercury Racing Revolution XR is a good place to start. Designed for the 6.4-inch gearcase on Mercury V10 Verado outboards, the REV XR pairs the four-blade stainless steel Revolution X design with Mercury Racing’s hand-applied Pro Finish.
What does the REV XR do?
The REV XR keeps the standard-length Revolution X barrel, making it the better choice of the two Pro Finish models when your hull already carries the stern the way you want. Mercury Racing hand-finishes each propeller to its Pro Finish specifications and estimates a gain of approximately 150 RPM over a stock Revolution X. The actual change will depend on your hull, engine setup, and typical load.
Choosing your pitch and rotation
The REV XR is available in 20P through 33P, in one-inch increments, with right-hand and left-hand rotation offered at every pitch. If you’re replacing a stock Revolution X and have room for another 150 RPM within your engine’s recommended wide-open-throttle range, your current pitch is a sensible starting point. If you already run near the top of that range with your usual load, factor the expected RPM gain into your pitch selection.
Mercury Racing recommended hub kit: 8M0182969.
Mercury Marine offers a 1-year limited warranty on all Mercury propellers. To determine warranty requirements for a specific item, please contact the manufacturer or contact us for assistance. Please note warranty processing may take 2-4 weeks and will be subject to Mercury Marine's policies and discretion. Mercury warranty does not cover defects determined to be caused by normal wear or due to customer negligence.
We do not keep the Mercury Racing Revolution XR propellers in our immediate inventory. It will be special ordered from Mercury Racing. If you would like to call us at (920) 788-0220 we can provide you with a specific lead time for delivery.
Description
Mercury Marine Revolution XR Propeller
If you like how your boat rides with a Mercury Revolution X but want to pick up a little RPM at wide-open throttle, the Mercury Racing Revolution XR is a good place to start. Designed for the 6.4-inch gearcase on Mercury V10 Verado outboards, the REV XR pairs the four-blade stainless steel Revolution X design with Mercury Racing’s hand-applied Pro Finish.
What does the REV XR do?
The REV XR keeps the standard-length Revolution X barrel, making it the better choice of the two Pro Finish models when your hull already carries the stern the way you want. Mercury Racing hand-finishes each propeller to its Pro Finish specifications and estimates a gain of approximately 150 RPM over a stock Revolution X. The actual change will depend on your hull, engine setup, and typical load.
Choosing your pitch and rotation
The REV XR is available in 20P through 33P, in one-inch increments, with right-hand and left-hand rotation offered at every pitch. If you’re replacing a stock Revolution X and have room for another 150 RPM within your engine’s recommended wide-open-throttle range, your current pitch is a sensible starting point. If you already run near the top of that range with your usual load, factor the expected RPM gain into your pitch selection.
Mercury Racing recommended hub kit: 8M0182969.
Mercury Marine Revolution XR
Stainless Steel
Will this propeller fit my motor?
Revolution XR Propeller Fitment
The Mercury Marine Revolution XR propeller requires a Flo-Torq hub kit for installation (sold separately). Listed below are the models of Mercury Marine outboards/sterndrives that the Revolution XR propeller will fit, along with the corresponding hub kit necessary for installation.
Mercury Verado V10 Outboards (6.4" Gearcase)
Mercury Revolution XR Blog
Mercury Racing Introduces the Revolution XR and XST for V10 Verado Outboards
Mercury Racing’s new Revolution XR and XST bring its Pro Finish to the V10 Verado propeller lineup. See how the XR’s standard barrel compares with the XST’s shorter barrel, and which model fits the...
Mercury Revolution XR Propeller
The Revolution X gets the Mercury Racing touch.
Designed for the 6.4-inch V10 Verado® gearcase, the Revolution XR pairs the four-blade stainless steel Revolution X design with Mercury Racing’s hand-applied Pro Finish. Its standard-length barrel makes it a natural upgrade for boaters who like how their hull rides and want a little more RPM. At the same pitch, Mercury Racing estimates a gain of roughly 150 RPM at wide-open throttle over the stock Revolution X.
Expert Advice
Do you need guidance in selecting the correct Mercury Marine Revolution XR propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop School
Do you have questions about the basics of propellers? Check out our comprehensive guide on the different facets of propeller technology, and its impact on boat performance.
Expert Advice
Do you need guidance in selecting the correct Mercury Marine Revolution XR propeller for your application? Contact Boat Prop Warehouse today to talk to an expert.
Prop School
Do you have questions about the basics of propellers? Check out our comprehensive guide on the different facets of propeller technology, and its impact on boat performance.
Testimonials
Brad B.
Mercury Revolution X Propeller
Running a Boston Whaler 380 Outrage with triple V10's. Upgrade from my Yamaha outboards and it's like I have a whole new boat. Much more power, really jumps out of the water.
Scott M.
Mercury Revolution X Propeller
I have a 36' Contender Fisharound with twin Mercury V10 outboards. Ran the 24P Revolution X and it works well. Probably should have went with a higher pitch but for now these will have to work.
Cody Z.
Mercury Revolution X Propeller
I talked with Gary at Mercury about which pitch to get. The props came quickly and the RPMs run right where Gary thought they would. Thank you.
Jordan T.
Mercury Revolution X Propeller
With my Monterey 275 I get about 62 MPH at top speed (400HP V10). Propeller worked out well, thank you Matt for the help.
Isaiah C.
Mercury Revolution X Propeller
With the V10 being new there was not much testing information to make a pitch decision. My local dealer didn't have anything to test. In the end the props worked great, but had to get both 23P and 25P sets.
Shop All
Mercury Propellers
Whether you’re looking for a replacement prop or want to optimize your boat’s speed, hole shot or efficiency, keep in mind that prop selection is about more than just pitch, diameter and number of blades. Performance is influenced by every aspect of a prop’s geometry, right down to cup, rake angle and edge shape.
Aluminum
Contact Us
Do you have any questions?
We are here to help! You can contact us either by our online form on this page or via phone, email, or chat.
Important Note: The more information you can provide us with, the more accurate/reliable any propeller suggestions we make will be.